R and D 10'6 Fish Simmons Tri
So Skip bought both of us 10'8 blanks last week to create to r and d boards for his new fins by North Shore Fins. He has 3 sizes of his tri fin template for fcs set ups. On top of that the foil and flex of the fibreglass is insane! Skip shaped a foiled out 10'7 Eagle which is already being laminated at Michael Millers place and I'm shaping a 10'6 Fish Simmons Tri, the first one at the length to ever get fcs plugs put in for all 3 fins. Can't wait for San O sessions this summer! Skips eagle is Laker purple tint, don't know what color mine will be yet but I'll post pics.
look out! Super secret after burners....
look out! Super secret after burners....
Tales of the Egg Art (Japan 2)
So below are a few pics from one of the amazingly long nights in Tokyo. Featured artists , Andy Davis, Jeff Canham and Tyler Warren. And yes, I scribbled something just to say I did. The boys had to do a live art exhibition and I happened to provide the canvas for the trip. 8'0 Egg.
stacked shaka switch
tall stack (top to bottom)
Michael Miller Quad Fish
J Hall Mini fish simmons tri
J Hall SD Keel
Skip Frye 11'0 Pintail Gun
J Hall 10 Pintail Gun
all in a days work for Michael and his Surfin Factory
Not quite Alaia sliding but...????
So here is what Skip and I and two others have been doing of late. Sliding the big boards with just our little side bites. From 11'0 Pintails, to 8'0 eggs, its got us pretty stoked. In fact, the most Skip had been stoked since he built his first 11 footer (the story of the big board in the Seedling by Thomas Campbell) Check it!
2.5's
to 4's
2.5's
to 4's
Mini Fish Simmons Tri Fin
Most of my designs are derivatives of tri fin boards. Just the action we've found with quad fin set ups, it just carried in to another design thread. Not that three fins is a bad thing!
Hello friends
J Hall checking back in after a long over due break from truly blogging. Part Internet hassle, part computer hassle, also part time off having since moved out of my place from the Jesus trucks, over to a quaint little complex below the feet of the USD campus, occupied by a few stellar names in the business, Skip Frye and Michael Miller. Larry Gephart is in the hood, as well as Bird Huffman's new board storage/ museum facility. Also the king ding repair and essential fish taco builder (among many other things) Joe Roper is just a half mile down the road. We're all stoked to be building surfboards and we all hope that it will create a great thing for keeping the traditional shaping roots and designs of San Diego alive and strong for the future. Not only that, but orders are getting turned around quickly right now.
A few big shakas and shout outs must go out first!!! Primarily to Michael Miller! http://factorysurfin.blogspot.com/ Michael was open and gracious enough to allow me to occupy space in his factory during the two month turnaround between moving out of the old place and building out the new place. There is no way I could have done it other wise. Dennis Downs (sander/polisher extraordinaire) for stoking me out and hooking up the electrical for me in the new spot! You pick your model! My dad, Dave Hall for lending many needed hands during the construction phase of the shaping and show room, can't be a surf factory with out pops helping out and downing a few tecates. Also big thanks to him for the kine back patio setup, umbrella and table for kine lunch breaks! I was a little scared about Daniel leaving from the old place but it has sent him to the big island now where I hear he is about to fire up his sander again and start with some fins. Don't fret, Geppy also stops by regularly to drop the kine hand foiled goodies. Last but not least, thank you to Skip for over seeing the neighbors and giving me the nod of approval! I can't wait to see what this new proximity to him will bring to surfing!
So with out further ado, below are some of the happenings of the last few months. Minus the Sacred Craft in Ventura which I missed due to a trio out to New York for the Fish Fry (no pics, sorry). Enjoy!
Cleaning up and leaving with the walls from the place on Hancock St.
A lot happened in between these two photos but basically, I had moved all the old factory in large chunks to the new spot. It came together quickly. Dennis checking his plumbing.
Again, skipped the dry walling, mudding, sanding, mudding, taping, sanding mudding and painting, but here is a look at phase 1 done. the shaping room.
Wall paper
First blank. For a 10'0 California Pintail Gun, template courtesy of Skip. Thanks Skipper!
The great thing about the new local is that as soon as I sign a blank I can walk it over to Michael and it'll get started the next week. Pretty sick!
Skip with Yuichi 2, 11'0 Cali Pintail Gun
A few big shakas and shout outs must go out first!!! Primarily to Michael Miller! http://factorysurfin.blogspot.com/ Michael was open and gracious enough to allow me to occupy space in his factory during the two month turnaround between moving out of the old place and building out the new place. There is no way I could have done it other wise. Dennis Downs (sander/polisher extraordinaire) for stoking me out and hooking up the electrical for me in the new spot! You pick your model! My dad, Dave Hall for lending many needed hands during the construction phase of the shaping and show room, can't be a surf factory with out pops helping out and downing a few tecates. Also big thanks to him for the kine back patio setup, umbrella and table for kine lunch breaks! I was a little scared about Daniel leaving from the old place but it has sent him to the big island now where I hear he is about to fire up his sander again and start with some fins. Don't fret, Geppy also stops by regularly to drop the kine hand foiled goodies. Last but not least, thank you to Skip for over seeing the neighbors and giving me the nod of approval! I can't wait to see what this new proximity to him will bring to surfing!
So with out further ado, below are some of the happenings of the last few months. Minus the Sacred Craft in Ventura which I missed due to a trio out to New York for the Fish Fry (no pics, sorry). Enjoy!
Cleaning up and leaving with the walls from the place on Hancock St.
A lot happened in between these two photos but basically, I had moved all the old factory in large chunks to the new spot. It came together quickly. Dennis checking his plumbing.
Again, skipped the dry walling, mudding, sanding, mudding, taping, sanding mudding and painting, but here is a look at phase 1 done. the shaping room.
Wall paper
First blank. For a 10'0 California Pintail Gun, template courtesy of Skip. Thanks Skipper!
The great thing about the new local is that as soon as I sign a blank I can walk it over to Michael and it'll get started the next week. Pretty sick!
Skip with Yuichi 2, 11'0 Cali Pintail Gun
10'5 JR Comp Model for One foot Jo Jo
part pintail, part eagle, part nose rider. This board seems to do it all!
Le Animale
The newest collabo board with the flapper mike list. We've had quite the success with the JM Model we worked on so this is the latest creation. Now form the start I had my doubts, two deep wings, way up and out of alignment from the fins, flutes off the wing tips, single to double barrel vee, and newly acquired bamboo fins form Marlin. Crazy combo right? Well, my first wave it felt like I had been riding the board for months, in tune, lots of drive, and insane cut backs. It hard to tell what the combo is that worked, but I'll say the fins had were the majority of the reason. I had them flex in a roundhouse off the top cut back in a place in the lip that I'd never had fins load and unload before. Awesome awesome awesome. Thanks for the idea and art work flapper, and thanks to Marlin for the fins!
Subscribe to:
Posts (Atom)
